欢迎光临冠杰商行

冠杰订购热线：

0755-27839151
您是否在搜：精工晶振爱普生晶振KDS晶振西铁城晶振NDK晶振京瓷晶振大河晶振泰艺晶振希华晶振村田陶瓷晶振
当前位置：首页 » 技术支持 » Suntsu晶振OCXO系列SGO12S振荡器保持精确计时

Suntsu晶振OCXO系列SGO12S振荡器保持精确计时

返回列表 来源：冠杰电子 浏览：- 发布日期：2024-01-04 13:35:25【大 中 小】

Suntsu晶振OCXO系列SGO12S振荡器保持精确计时

使用Suntsu升级的GPS专业振荡器SGO12S系列保持精确计时

Preserve Accurate Timing with Suntsu’s Upgraded GPS Disciplined Oscillator SGO12S Series

Suntsu Crystal released the first version of our GPS Disciplined Oscillator (GPSDO), the SGO10S. Now, we’re happy to say we’ve been working on a new GPSDO to help you build better products. A GPSDO, also called a GPS clock, is made up of a high-stability oscillator and a GPS receiver. These devices work by having the output of the oscillator controlled, or steered, through a tracking loop according to the GPS receiver or GNSS satellite signal.
GPS Disciplined Oscillator (GPSDO), the SGO10S
The combination of a GPS receiver and the oscillator allows both short- and long-term stability for the device, making them one of the most accurate and trusted sources of timing. Because of this, GPS clocks are used in various network and satellite systems. Other applications they are good for include functioning as the basis for Coordinated Universal Time (UTC), synchronization to wireless base stations, PNT such as passive radar, critical infrastructure, and Cube and LEO Satellite Communications. After working to upgrade electrical performance and reduce the package size to meet market demands, Suntsu is proud to announce the next GPS Disciplined OCXO series, SGO12S, to our product line. Because we have improved phase noise performance and frequency stability over operating temperature without GPS lock, our upgraded GPSDO can be used for military communication equipment.

Suntsu’s SGO12S includes an internal GNSS receiver with 1PPS output compatible with GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1, WAAS, EGNOS, MSAS, GAGAN, and Galileo applications. This oscillator is also connected to an external antenna via a SMA connector which can maintain a 1PPS signal with a holdover of 1.5µs for a 24-hour period if GNSS signals fail. It’s important to note that a reliable OCXO is necessary to ensure that even when signals are lost, accurate timing is preserved.

Suntsu的SGO12S系列

Suntsu晶振OCXO系列SGO12S振荡器保持精确计时

使用Suntsu升级的GPS专业振荡器SGO12S系列保持精确计时
Suntsu松图晶振发布了第一个版本的GPS纪律振荡器(GPSDO)，SGO10S。现在，我们很高兴地说，我们正在开发一个新的GPSDO来帮助您构建更好的产品。GPSDO也称为GPS时钟，由高稳定性石英晶体振荡器和GPS接收器组成。这些设备的工作原理是根据GPS接收器或GNSS卫星信号，通过跟踪环路控制或操纵振荡器的输出。

GPS接收器和振荡器的结合使设备具有短期和长期稳定性，使其成为最精确和最可靠的时间源之一。因此，GPS时钟被用于各种网络和卫星系统。它们擅长的其他应用包括用作协调世界时(UTC)的基础、与无线基站同步、PNT(如无源雷达)、关键基础设施以及Cube和LEO卫星通信。在努力提升电气性能和缩小封装尺寸以满足市场需求后，Suntsu自豪地宣布我们产品线的下一代GPS规范OCXO晶振系列SGO12S。由于我们在没有GPS锁定的情况下改善了工作温度范围内的相位噪声性能和频率稳定性，因此升级后的GPSDO可用于军事通信设备。

SGO12S石英晶振产品规格
包装尺寸  50mmx 50mm
频率 10MHz
频率稳定性与工作温度的关系
(不带GPS锁定) 		-20 ~ 60°C时为0.1ppb
在-20 ~ 70°C范围内为5.0ppb
-40 ~ 80°C时为15.0ppb
频率准确度 1ppt
脉冲宽度 1PPS基准电压输入和输出
保持24小时 1.5秒
电源电压 12.0V
其他功能 正弦波输出
超低相位噪声

Suntsu的SGO12S有源晶体包括一个内置GNSS接收器，1PPS输出，兼容GPS/QZSS L1 C/A、GLONASS L10F、北斗B1 SBAS L1、WAAS、EGNOS、MSAS、GAGAN和伽利略应用。该振荡器还通过SMA连接器连接到外部天线，如果GNSS信号失败，该连接器可以在24小时内保持1PPS信号，保持时间为1.5 s。需要注意的是，可靠的OCXO是必要的，以确保即使信号丢失，也能保持准确的时序。

SGO12S石英晶体产品特点：

1PPS和10MHz输出恒温晶振
GPS/QZSS L1 C/A、GLONASS L10F、北斗B1 SBAS L1
C/A:WAAS、EGNOS、MSAS、GAGAN Galileo E1B/C
频带：L1（1575.42MHz）
跟踪代码：C/A代码
跟踪能力：多达24颗卫星

应用程序：4G/5G/LTE，时钟源，基站，测试设备，军事通信设备

恒温晶体振荡器——OCXO的
Suntsu晶振厂家，生产的OCXO的有通孔包装，有多种尺寸可供选择。我们提供许多不同的电压和逻辑选项，并可提供800ppt稳定性的器件。从下面列出的数据表中选择一个标准零件号，或者联系我们的销售团队请求您想要的任何定制参数，我们将根据您的特定需求进行设计。
恒温晶体振荡器使用温控室将振荡器内部的石英晶体保持在恒定温度，以防止由于外部温度变化而导致的频率变化。OCXO通常用于控制无线电发射机、蜂窝基站、军事通信设备的频率，以及需要晶体提供最高频率稳定性的测量应用。


OCXO相关产品：

Series Image Logic Package Stability To Voltage(s) Frequency Reel Key Feature
SOC09C SOC09C OCXO CMOS 9.7X7.4 SMD OCXO ±20ppb 3.3V 10.000MHz - 40.000MHz 800 Small Size, SMT
SOC14C SOC14C CMOS 14.4X9.4 SMD OCXO ±20ppb 3.3V 10.000MHz - 40.000MHz 800 Small Size, SMT
SOC15C SOC15C OCXO HCMOS 15.4X10.6 SMD OCXO ±5.0ppb 3.3V, 5.0V 10.000MHz - 20.000MHz 350 Small Size, SMT
SOCFSC SOCFSC OCXO HCMOS 14 PIN DIP OCXO 20.7 X 13.1 ±50ppb 5.0V, 9.0V, 12.0V 10.000MHz - 80.000MHz N/A Small Size
SOCFSS SOCFSS OCXO SINE WAVE 14 PIN DIP OCXO 20.7 X 13.1 ±50ppb 5.0V, 9.0V, 12.0V 10.000MHz - 80.000MHz N/A Small Size
SOC20C SOC20C OCXO HCMOS 20.0X20.0 DIP OCXO ±10ppb 5.0V, 9.0V, 12.0V 1.000MHz - 80.000MHz N/A High Stability, Low Phase Noise
SOC25C SOC20C OCXO HCMOS 25.4X25.4 DIP OCXO ±10ppb 5.0V, 9.0V, 12.0V 1.000MHz - 80.000MHz N/A High Stability, Low Phase Noise
SOC25S SOC25S OCXO SINE WAVE 25.4X25.4 DIP OCXO ±10ppb 5.0V, 12.0V 5.000MHz - 100.000MHz N/A High Stability, Low Phase Noise
SOC36C SOC36C OCXO HCMOS 36.1X27.2 DIP OCXO ±7.5ppb 5.0V, 9.0V, 12.0V 5.000MHz - 100.000MHz N/A High Stability, Low Phase Noise
SOC36S SOC36S OCXO SINE WAVE 36.1X27.2 DIP OCXO ±7.5ppb 5.0V, 9.0V, 12.0V, 15.0V 5.000MHz - 100.000MHz N/A High Stability, Low Phase Noise
SOC38C SOC38C OCXO HCMOS 38.1X38.1 DIP OCXO ±10ppb 5.0V, 9.0V, 12.0V, 15.0V 5.000MHz - 100.000MHz N/A High Stability, Low Phase Noise
SOC38S SOC38C OCXO SINE WAVE 38.1X38.1 DIP OCXO ±10ppb 5.0V, 9.0V, 12.0V, 15.0V 5.000MHz - 100.000MHz N/A High Stability, Low Phase Noise
SOC50C SOC50C OCXO HCMOS 50.0X50.0 DIP OCXO ±5.0ppb 5.0V, 9.0V, 12.0V 5.000MHz - 100.000MHz N/A High Stability, Low Phase Noise
SOC50S SOC50S OCXO SINE WAVE 50.0X50.0 DIP OCXO ±5.0ppb 5.0V, 9.0V, 12.0V 5.000MHz - 100.000MHz N/A High Stability, Low Phase Noise




“推荐阅读”

【本文标签】：Suntsu晶振OCXO系列SGO12S振荡器保持精确计时
【责任编辑】：冠杰电子版权所有：http://www.guanjiedz.com转载请注明出处

相关技术支持

最新资讯文章

冠杰首页晶振厂家台产晶振进口晶振欧美进口晶振有源晶振雾化片关于冠杰行业资讯网站地图